12.62. Removal and installation of activators of the uniform lock

Door lock activator

REMOVAL

PERFORMANCE ORDER
1. Remove a beam, address the subsection Removal and installation of a forward door and the holder of adjusting elements and an illustration.
2. Uncover the door lock, address the subsection Removal and installation of the handle of a forward door and the cylinder of the lock.
3. Disconnect driving and lock drafts, address the subsection Removal and installation of the handle of a forward door and the cylinder of the lock.
4. Disconnect a vacuum hose of the uniform lock.
5. Disconnect a cable (4A).
6. Turn out screws-1-.
7. Take out the lock of a door –3– lined –2–.

INSTALLATION

PERFORMANCE ORDER
1. Put into place the lock-3-lined –2–. Tighten screws-1 the moment of 10 N • m.
2. Connect a cable. The fragment (4B) shows the attached cable.
3. Connect lock and driving drafts, and also a door lock cover, address the subsection Removal and installation of the handle of a forward door and the cylinder of the lock.
4. Establish a beam, address the subsection Removal and installation of a forward door and the holder of adjusting elements.

Back door activator

REMOVAL

PERFORMANCE ORDER
1. Remove facing of a door of a back, address the subsection Removal and installation of facing of a door of a back.
2. Squeeze out pins (shooters) and take out a driving element –1– of the back door lock. If necessary use for this purpose the screw-driver.

INSTALLATION

PERFORMANCE ORDER
Installation is carried out in the sequence, the return to removal.

Activator of a cover of the hatch of the fuel tank

REMOVAL

PERFORMANCE ORDER
1. Remove a back lamp, address the subsection Removal and installation of a back lamp.
2. I will corrode Rasstykuyte, address subsection the Uniform lock - general information and vacuum hoses.
3. Through a window (arrow A) from a reverse side release blocking of a driving element-1-and take out it.

INSTALLATION

PERFORMANCE ORDER
1. Put into place a driving element and record it.
2. Insert the angular plug into a driving element.