Audi A3 - the Repair manual and operation
1. Maintenance instruction
2. Current leaving and service
3. Engine
4. Cooling systems, heating
5. A power supply system and production of the fulfilled gases
6. Engine electric equipment
7. Manual box of gear shifting
8. Automatic transmission and models with the four-wheel drive
9. Coupling and power shafts
10. Brake system
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. Electric equipment of system of comfort
13.2. Diagnostics of malfunctions of onboard electric equipment - the general information
13.3. Check of the electric motor of a screen wiper
13.4. Check of the warmed back glass
13.5. Check of a stoplight
13.6. Removal, installation and check of a sound signal
13.7. Safety locks
13.8. Fusible inserts - the general information
13.9. Chain breakers (thermal relays)
13:10. Relay
13:11. Replacement of batteries of a key of remote control
13:12. Replacement of a battery / lamp of a key with illumination
13:13. Anticreeping blocking
13:14. Lighting devices
13:15. Replacement of lamps of external lighting
13:16. Replacement of bulbs of internal lighting
13:17. Removal and installation of a headlight
13:18. Removal and installation of the electric motor of adjustment of range of light
13:19. Removal and installation of the forward index of turn
13:20. Removal and installation of a back lamp
13:21. Adjustment of light of headlights
13:22. Devices
13:23. Removal and installation of the control panel
13:24. Removal and installation of the understeering switch
13:25. Removal and installation of switches and lamps
13:26. Removal, installation and coding of the radio receiver
13:27. Input of a code of the radio receiver
13:28. Removal and installation of a loudspeaker
13:29. Removal and installation of the antenna of a roof
13:30. Additional installation of a radio telephone on in a special way the prepared models
13:31. Removal and installation of the electric motor of a forward screen wiper
13:32. Removal and installation of the lever and electric motor of a back screen wiper
13:33. Removal and installation of a cleaner of back glass
13:34. Removal and installation of the tank with the windscreen washer pump
13:35. Elements of a tempostat
14. Electrical circuitries
13:20. Removal and installation of a back lamp
REMOVAL
PERFORMANCE ORDER
1.
Remove the holder of a lamp –1–, address
the subsection Replacement of Lamps of External Lighting
.
2.
Turn off 4 nuts of fastening (arrow).
3.
Squeeze a stopper –4– and remove a back lamp outside.
INSTALLATION
PERFORMANCE ORDER
1.
Visually check consolidation of a back lamp for existence of damages.
2.
Insert a back lamp and record it. Slightly tighten nuts the moment of 4 N • m.
3.
Establish the holder of a lamp, address
the subsection Replacement of Lamps of External Lighting
.