13:21. Adjustment of light of headlights

Adjusting screws of headlights

(the left main headlight is shown, at a right headlight adjusting screws are located specularly)

1 – adjustment down 2 - adjustment across

PERFORMANCE ORDER
1. The correct adjustment of headlights is of great importance for traffic safety of the car. Exact adjustment of headlights is possible only in the presence of the special device. Therefore here is only shown where headlights and what conditions have to be satisfied for the correct adjustment are regulated.
2. At adjustment of headlights also fog lights if they are available are regulated.

Adjustment conditions

PERFORMANCE ORDER
1. Tires have to be pumped up by the established air pressure.
2. The car should not be loaded. On a seat of the driver freight weighing 75 kg (one person) has to be located.
3. Fill with fuel a tank, at least for 90%.
4. Install the car on the flat platform.
5. Several times strongly press through a forward part of the car down that shock-absorbers of a forward suspension bracket reached the correct position.
6. Establish adjustment of range of headlights on "0".
7. Headlights have to be regulated only at passing beam. The inclination makes for a normal headlight x = 10 cm by 10 m of length. The relation of an inclination is beaten out on the holder of a headlight (1.0% 10 cm by 10 m) (With and an arrow).

Adjustment

PERFORMANCE ORDER
1. Enter the screw-driver with crosswise to vents through openings (A/B) or (1/2) in the holder of the lock.
2. Turn adjusting screws so that to reach correct installation.