13:17. Removal and installation of a headlight
Headlight with the mechanism of adjustment of range of light
1 – clips (6 pieces)
2 – lens
3 – consolidation of the lens
4 – headlight case
5 – lamp of passing beam
6 – socket
7 – electric motor of adjustment of range of light | 8 - lamp of parking light
9 – a lamp of driving beam or driving beam with fog light
10 – socket
11 – consolidation of a cover of the case
12 – case |
Back lamp
1 – case of a back lamp
2 - stoplight lamp / back lamp
3 – backing lamp lamp
4 – nuts, 4 N • m | 5 – body
6 - holder of a lamp
7 – lamp of a foggy lamp
8 – turn signal lamp |
Back lamp
The lens and the case of a headlight can be replaced independently from each other.
REMOVAL
| PERFORMANCE ORDER |
| 1. Remove the index of turn, address the subsection Removal and installation of the forward index of turn. | | 2. For an exception of damage of a paint and varnish covering at removal of a headlight paste over a bumper around a headlight. | | 3. Turn out side bolts of fastening (the shooter on an illustration) a key of Torx of T30. |
| 4. Turn out the top bolts of fastening by-1 key of Torx T30. | | 5. Turn a headlight-2-to the center of the car (shooter) and then take out from a body forward. |
| 6. Rasstykuyte I will corrode headlights and adjustments of range of light. | |
INSTALLATION
| PERFORMANCE ORDER |
| 1. Insert a headlight at first around the central part of the car a pin –1– into a guide –2–. | | 2. Join the socket of a headlight and the mechanism of adjustment of range of light. | | 3. Slightly fix a headlight, expose it on a contour of a body and tighten the moment 6 N • m. |
| 4. Establish the index of turn, address the subsection Removal and installation of the forward index of turn. | | 5. Check adjustment of a headlight for HUNDRED. | | |
|