13:32. Removal and installation of the lever and electric motor of a back screen wiper

Lever of a back screen wiper
1 – brush
2 – cap
3 - nut, 16 N • m
4 – spring washer		5 - cleaner lever
6 – nozzle
7 – power shaft of the electric motor
8 - brush rubber

Electric motor of a back cleaner
1 – electric motor
2 – sealing rubber
3 – an opening in back glass
4 – nozzle
5 – power shaft of a back cleaner		6 – connecting tube
7 – socket
8 – nuts, 3 pieces, key of 10 mm
9 – water hose
10 – electric motor cover

Lever of a back screen wiper

REMOVAL

PERFORMANCE ORDER
1. Carefully hook the small screw-driver and remove a cap –2–.
2. Turn off a nut –3– and remove together with a spring washer –4–.
3. Remove the lever-6-from an electric motor-7-shaft.

INSTALLATION

PERFORMANCE ORDER
1. Switch off the screen wiper electric motor switch.
2. Install the lever so that rubber-8-was at distance of 5 mm from ceramics.
3. Tighten the lever the moment of 8 N • m also put on a cap.
4. Include a cleaner of back glass, if necessary rearrange it.

Electric motor of a back cleaner

REMOVAL

PERFORMANCE ORDER
1. Remove the lever.
2. Remove internal facing of a door of a back, address the subsection Removal and installation of facing of a door of a back.
3. Rasstykuyte socket-7-.
4. Carefully remove a hose for water-9-from a connecting tube –6–.
5. Turn off nuts –8– and remove the electric motor of a cleaner –1–.

INSTALLATION

PERFORMANCE ORDER
1. Carefully insert sealing rubber-2-into an opening of back glass-3-.
2. Carefully insert the electric motor into sealing rubber-2-and press its moment 8 N • m to a finger.
3. Further installation is made in the sequence, the return to removal.