13:25. Removal and installation of switches and lamps
Switch/regulator of range of light
| PERFORMANCE ORDER |
| 1. Press the switch of light-1-and at the same time turn it –2– on the left. |
| 2. Hold the switch in this situation and take out light switch case from the dashboard-3-. |
| 3. I will corrode Rasstykuyte at the switch. |
| 4. Raise the flat screw-driver or a plastic wedge side stoppers (arrows on an illustration) at the regulator-1-and thus release stoppers. |
| 5. Take out the regulator-1-from light switch case back. | | 6. Insert the regulator into a guide on the switch of light-2-and press into light switch case. | | 7. Join the socket. |
| 8. For installation press the switch of light-1-and at the same time turn it –2– to the right. Thus both lock hooks are pressed. | | 9. In this situation press light switch into an opening of the dashboard-3-and record. | |
The switch in the central console |
PERFORMANCE ORDER |
| 1. Remove the radio receiver, address the subsection Removal, installation and coding of the radio receiver. | | 2. Open an ashtray and take out an insert. | | 3. Turn out the screw with crosswise shliyets –1– and remove an ashtray –2–. |
| 4. Rasstykuyte I will corrode lamps of illumination of an ashtray and the lighter. | | 5. Turn out 2 screws with crosswise shliyets (shooters on an illustration). |
| 6. Turn out 2 screws with crosswise shliyets (shooters on an illustration) in a radio receiver aperture. |
| 7. Carefully remove facing –1– up. | |
| 8. Press a hand the corresponding switch behind through a radio receiver aperture forward. At the same time at the same time carefully small screw-driver press brackets between the switch and the central console. | | 9. In the conclusion completely take out the switch and to a rasstykuyta I will corrode. |
| 10. Installation is carried out in the sequence, the return to removal. | |
Switch of the lighting lamp of a ware box
| PERFORMANCE ORDER |
| 1. Carefully wring out a side cover of the dashboard on the party of the forward passenger. | | 2. Rasstykuyte shtekerny connections-1-also remove cable tips –2–. |
| 3. Put forward the switch –3– of the holder of the dashboard in the direction of an arrow. | | 4. Installation is carried out in the sequence, the return to removal. | |
Switch of the window regulator/mechanism of adjustment of a mirror
|
PERFORMANCE ORDER |
| 1. Remove facing of a door, address the subsection Removal and installation of facing of a door. |
| 2. Carefully separate an insulating mat on a reverse side of facing. | | 3. Rasstykuyte socket of the switch of a window regulator –3– and/or mechanism of adjustment of a mirror –1–. | | 4. Take out the switch-1-from facing of a door. For this purpose open stoppers –2–. |
| 5. Installation is carried out in the sequence, the return to removal. | | | |
Switch of the movable panel of the hatch / internal lamp
The regulator of the movable panel cannot be replaced separately. With malfunctions it is necessary to replace knot of management and the internal lamp in a set.
|
PERFORMANCE ORDER |
| 1. Extend fingers the lens-1-forward and disconnect him behind. |
| 2. Unscrew screws of fastening –2– and remove the switch of the movable panel / the internal lamp-3-. |
| 3. Squeeze the screw-driver hooks (V) and extend the switch of the movable panel forward, disconnect it behind (And). |
| 4. Rasstykuyte shtekerny connections-4-and-5-. 6 – a reading illumination lamp, 7 – a lamp of the internal lamp. |
| 5. Join shtekerny connections at the switch of the movable panel / the internal lamp. | | 6. Fix the switch of the movable panel / the internal lamp in situation (A) and (In) and record. | | 7. Fix the switch / the internal lamp two screws. | | 8. Fix behind the lens and insert in front into an opening. | |