13:31. Removal and installation of the electric motor of a forward screen wiper

REMOVAL

PERFORMANCE ORDER
1. Remove cleaner levers, address the subsection Removal and installation, check and adjustment of final position of levers of a screen wiper.
2. Remove heating of a windshield, address the subsection Removal and installation snuffled a windshield washer.
3. Rasstykuyte cleaner electric motor socket.
4. Turn out 3 screws of fastening (a key of 10 mm) –1–.
5. Carefully cast away ahead a cleaner frame –2 (shooters) and then in a set take out from a water-collecting compartment to the left.
6. Disconnect draft –3– from the spherical hinge (the shooter on an illustration).
ATTENTION

The nut (key of 10 mm) at a crank of the electric motor should not be turned off.

7. Unscrew 3 screws-2-(a key "10") at the holder of the electric motor of a cleaner.
8. Remove the electric motor-1-from the holder.

INSTALLATION

PERFORMANCE ORDER
1. Fix the electric motor-1-with a crank to the holder –2–.
2. –3– establish draft in extreme situation. At the same time points (a) have to lie on one line.
3. In this situation put on draft a head of the hinge (shooter).
4. Join the socket at the cleaner electric motor.
5. Previously enter a frame with the electric motor into a water-collecting compartment.
6. Cast away a cleaner frame forward and fix by the moment 8 N • m.
7. Establish heating of a windshield, address the subsection Removal and installation snuffled a windshield washer.
8. Install levers, address the subsection Removal and installation, check and adjustment of final position of levers of a screen wiper.
9. Attach a cable of mass of the rechargeable battery.
ATTENTION

Make active automatic equipment of the power window, and also establish hours and enter a radio tape recorder code, address the subsection Input of a Code of the Radio Receiver.