13:27. Input of a code of the radio receiver

(It is valid only concerning radio receivers with the coding)

Radio receiver sign with the coding is existence of a red symbol in the form of a key on a forward slip. If at the taken-out ignition key on the forward party the red light diode blinks, it means that the coding is made active and the radio receiver is ready to work.

The code interferes with unauthorized turning on of the radio receiver if its food was interrupted. The termination of power supply of the radio receiver happens, for example, at its removal, disconnection from the rechargeable battery or at burn-out of a safety lock.

If the radio receiver is coded, it is necessary to establish a radio receiver code before shutdown of the rechargeable battery or removal of the radio receiver. If the code is not known, only HUNDRED AUDIS can turn on the radio receiver.

The individual code number of a code is given in the operation manual on the radio receiver. It is not necessary to store it in the car.

Removal of electronic blocking

PERFORMANCE ORDER
1. Include food, turn on the radio receiver.
2. Press at the same time the FM and DX keys until on indication not to appear the message of "CODE". Release keys, soon the message "1000" is automatically displayed after that.
ATTENTION

At the "chorus" and "concert" radio receiver instead of the FM and DX keys the TR and RDS keys are pressed.

3. By means of keys of the choice of stations with 1 on 4 enter a confidential code. At the same time the key 1 enters the first place of number of a code, by a key 2 the second place, etc. A key press the number of times corresponding to code figure.
4. Then again press at the same time the FM and DX keys until the message of "SAFE" appears. Release keys. Now the radio receiver is ready to work again. Frequency is automatically displayed.
ATTENTION

If the incorrect code is mistakenly entered, then the message of "SAFE" at first blinks, and then shines constantly. Now all process of input can be repeated once again. If again the incorrect code is entered, the radio receiver is blocked approximately for 1 hour. After the expiration of 1 hour - the radio receiver at the same time has to remain included - blocking is removed. The cycle of input is repeated in the subsequent attempts.


Release cars since 8/98, equipped with the "beta" and "gamma" radio receivers

After connection of the radio receiver to the power supply there is an automatic data exchange between the radio receiver and the block of the dashboard. At the same time the code which is written down at the first activization of protection against thefts is compared. At compliance of a code the radio receiver is ready for operation.

The radio receiver is blocked if it is installed in other car or if the dashboard block is replaced. In this case it is necessary to remove blocking by introduction of a code.