13.6. Removal, installation and check of a sound signal

Behind a front bumper about one sound signal of high-pitch and low tone is on the left side established. For protection of contacts between the button of inclusion and a signal the relay is installed. At inclusion of a signal the chain of management of the relay becomes isolated.

REMOVAL

PERFORMANCE ORDER
1. Remove a bumper, at the same time address the subsection Removal and installation of bumpers.
2. Turn off nuts (a key on 13 mm) and remove nozzles of signals.
3. I will corrode Rasstykuyte for what press a clamp.

CHECK

PERFORMANCE ORDER
Connect a signal an auxiliary wire directly to an onboard battery room of batteries. At the same time connect contact it is black / a yellow cable with positive contact (+) the rechargeable battery, and contact of a brown cable with a negative cable (–) of the battery. The sound signal has to work.

INSTALLATION

PERFORMANCE ORDER
1. Insert nozzles of signals and fix.
2. Join the multicontact socket.
3. Establish a bumper, address the subsection Removal and installation of bumpers.