12:28. Removal and installation of bumpers
To removal of a front bumper
1 – facing of a bumper 2 – bolt, 25 N • m 3 – the bolt is six-sided, 6 N • m 4 – bumper 5 – the directing element | 6 – self-tapping screw, 1.5 N • m 7 – buffer 8 – clip 9 – the screw with crosswise shliyets |
Elements of a rear bumper
1 – peak 2 – self-tapping screw 3 – cover 4 – facing of a bumper 5 – nut, 23 N • m | 6 - bumper 7 – the directing element 8 – self-tapping screw, 1.5 N • m 9 – amplifier 10 – self-tapping screw, 1 N • m |
Front bumper REMOVAL
PERFORMANCE ORDER |
1. Press through a thin pin an insert (the shooter on an illustration) on a clip –8– and take out it. | 2. Turn out three Torx screws (T25) on a wheel casing at the left and on the right. |
3. Turn out screws with crosswise shliyets –9– from the lower party. | 4. Disconnect facing of a bumper above at the directing element-5-. |
5. Disconnect facing of a bumper sideways over wheel casings and remove from a bumper forward. | | 6. Turn out fastening bolts –2 support-1 of a bumper –3–. | | 7. Turn out screws with an internal hexagon –5– on both shock-absorbers-1-. |
8. Take out a bumper –4– of the shock-absorber and remove it forward. | |
INSTALLATION
PERFORMANCE ORDER |
1. Put on a bumper –4– shock-absorbers-1-. | 2. Screw screws with an internal hexagon –5– and tighten the moment 23 N • m. |
| 3. Tighten fastening bolts –2 support of a bumper the moment of 6 N • m, address an illustration. |
4. Establish in front facing –1– (address an illustration To removal of a front bumper) and correct it sideways over wheel casings. | 5. Fix facing of a bumper in the directing element-5-. | 6. Tighten from the lower party screws with crosswise shliyets. | 7. Fix facing of a bumper by three Torx screws from each party to loker of arches of wheels at the left and on the right. | 8. Insert clips –8– into openings above at facing of a bumper and press pins (shooter) so that they completely entered a clip, address a fragment on an illustration To removal of a front bumper. | |
Rear bumper REMOVAL
PERFORMANCE ORDER |
1. Remove slips –1– at the left and on the right for what unscrew self-tapping screws. | 2. Uncover –3–. | 3. Unscrew self-tapping screws of fastening of the amplifier-10-and remove the amplifier-9-. |
4. Turn out at wheel casings 3 self-tapping screws at the left and on the right. | 5. Take out facing of a bumper –4– from above from the directing element-7-. |
6. Hook facing of a bumper sideways over loker of arches of wheels and remove back. | 7. Turn off nuts –5– and remove a bumper –6–. | |
INSTALLATION
PERFORMANCE ORDER |
1. Establish into place a bumper and fix it by nuts –5–. | 2. Correct facing of a bumper –4– sideways over wheel casings and insert from above into the directing element-7-. | 3. Screw at the left and on the right in loker of arches of wheels 3 self-tapping screws. | 4. Put the amplifier-9-and fix him by self-tapping screws-10-. | 5. Put a cover –3–. | 6. Establish slips –1– at the left and on the right and fix them by self-tapping screws-2-. | |