12.66. Adjustment snuffled windscreen washer
Adjustment snuffled windscreen washer
PERFORMANCE ORDER
|
1. The directions of streams snuffled a screen wiper can be adjusted by means of a needle of 0.8 mm. For this purpose insert it into a nozzle and direct to a tag on glass. HUNDRED use for this purpose the special tool, for example, of HAZET 4850-1.
ATTENTION
If the stream is not regulated or leaves unevenly, the nozzle needs to be replaced.
|
2. Nozzles can be cleared by means of compressed air. For this purpose remove nozzles and blow a hose.
ATTENTION
Do not blow a nozzle against the direction of the expiration.
|
|
Windshield
PERFORMANCE ORDER
|
|
1. Plan on a windshield the felt-tip pen giving a soluble trace, 4 points in places where the stream has to concern. |
2. The sizes for adjustment are given in an accompanying illustration.
ATTENTION
The specified sizes are counted sideways from a water-collecting level –1– and from below from an additional cover –2–. The sizes represent anticipatory values for the moving car. It means that nozzles on the standing car give slightly displaced stream.
|
|
Back glass
PERFORMANCE ORDER
|
|
1. Plan on a windshield the felt-tip pen giving a soluble trace, 4 points in places where the stream has to concern. |
2. The size for adjustment is given in an accompanying illustration.
ATTENTION
The size is calculated for the direction going at right angle to the central axis of the drive of a screen wiper –1–.
|
3. Uncover –2– and adjust a nozzle. 3 – a cleaner brush, 4 – a ceramic element. |
|