12:39. Adjustment of a door of a back
ATTENTION Before adjustment of a door of a back it is necessary to establish a gas-filled emphasis, address the subsection Removal and installation of a door of a back.
PERFORMANCE ORDER |
| 1. Slightly fix a castle element by-1 nuts –2–. | | 2. Slightly fix by a bolt a-2-adjusting emphasis –1– below at facing of the lock. |
| 3. Unscrew tightening the screw-2-and extend an adjusting emphasis –3– a little. 1 – rivet. |
4. Close a door of a back –4– and expose it movement in the longitudinal and cross direction so that to provide a uniform gap in relation to adjacent elements of a body. The lock of a door of a back has to be fixed in a castle element in the second position. The size of a gap is specified in Specifications. | 5. When performing this operation an adjusting emphasis has to be displaced in the correct situation. |
6. Open a door of a back and slightly tighten the moment 2 N • m tightening the screw-2-. HUNDRED use the dynamometer screw-driver to achievement of the specified moment. | 7. Close a back door. |
| 8. Adjust an emphasis –1– by means of the probe from within so that their distance in relation to facing of an element of the lock made 1 mm. | ATTENTION
Adjusting emphasis –1– at the closed door of a back should not adjoin to facing of the lock.
|
9. Tighten a bolt –2 moment of 8 N • m. | 10. Check a gap, address Specifications. | |