12:11. Removal and installation of the central console

Electric sockets of the central console
1 heating of a seat of the driver
2 – heating of back glass
3 – signaling device
4 – heating of a seat of the forward passenger		5 – radio receiver
6 - lighter
7 – ashtray illumination
8 – diagnostic socket

REMOVAL

PERFORMANCE ORDER
1. Remove an ashtray in front.
2. Turn out the screw-1-.
3. I will corrode Rasstykuyte.
4. Remove the radio receiver, address the subsection Removal, installation and coding of the radio receiver.
5. Turn out screws-1 of facing –4–.
6. Remove facing –4–.
7. Remove a ware box, address the subsection Removal and installation of a ware box.
8. Remove the shelf from the driver, address the subsection Removal and installation of a pocket from the driver.
9. Turn out 4 screws-4-with spring clips –1–.
10. Turn out 2 screws-2-.
11. Pull the central console-3-a little forward and disconnect electric wires.
12. Displace forward and remove the central console.

INSTALLATION

PERFORMANCE ORDER
1. Install the central console.
2. Attach shtekerny connections according to an illustration.
3. Install the central console into position.
4. Tighten screws-2 the moment of 4 N • m.
5. Tighten screws-4 the moment of 4 N • m, do not forget about brackets.
ATTENTION

At installation of the central console spring brackets –1– above have to stand vertically, below horizontally.

6. Establish the shelf from the driver, address the subsection Removal and installation of a pocket from the driver.
7. Establish a ware box, address the subsection Removal and installation of a ware box.
8. Establish a peak –4– and press it. The peak has to be recorded.
9. Tighten screws the-1-small moment of 1.2 N • m.
10. Install the radio receiver, address the subsection Removal, installation and coding of the radio receiver.
11. Install an ashtray in front and enter the rubber holder –2– into the dashboard.
12. Join the socket of the lighter and illumination of an ashtray.
13. Tighten screws the-1-small moment of 1.2 N • m.