12:29. Removal and installation covered

Elements of fastening of a forward wing
1 wing
2 bolt, 10 N • m
3 self-tapping screw, 1.5 N • m		4 self-tapping screw, 1.5 N • m
5 bolt, 15 N • m
6 bolt, 15 N • m

REMOVAL

PERFORMANCE ORDER
1. Remove facing of a bumper, address the subsection Removal and installation of bumpers.
2. Remove a loker of an arch of a wheel, address the subsection Removal and installation of loker of an arch of forward and back wheels.
3. Turn out bolts of fastening –5– and covered levels also a longitudinal beam –2–.
4. Turn out a bolt –6– at an open door.
5. Turn out self-tapping screws-3-at the directing element.
6. Turn out self-tapping screws-4-under the closing leaf.
7. Remove a wing –1–.

INSTALLATION

PERFORMANCE ORDER
1. If necessary, restore a paint and varnish covering of a wing.
2. Establish into place a wing –1–.
ATTENTION

You watch that the established gaps were observed, address Specifications.

3. Screw self-tapping screws-3-and-4-at the directing element and under the closing leaf.
4. Screw a bolt –6– at an open door.
5. Screw bolts –5– at a level of a wing and at a longitudinal beam –2–.
6. Establish a loker of an arch of a wheel, address the subsection Removal and installation of loker of an arch of forward and back wheels.
7. Establish facing of a bumper, address the subsection Removal and installation of bumpers.