12:12. Removal and installation of facing are permanent And

REMOVAL

ATTENTION

For removal of facing of a rack And from the driver unscrew 2 screws. To unscrew the forward screw, it is necessary to remove the cowl lock drive handle.

PERFORMANCE ORDER
1. Unscrew 2 screws on the cowl lock drive handle. To unscrew the forward screw, it is necessary to pull for the handle.
2. Disconnect the handle from draft of the drive of the lock and put aside, address the subsection Removal and installation of a cable of the drive of the lock of a cowl.
3. Turn out the screw-1-.
4. Disconnect facing –3– from an entrance level of a door –2– and remove.

INSTALLATION

PERFORMANCE ORDER
1. Establish facing of a rack And below –3– under an entrance level.
2. Fix facing by the screw-1-.
3. Connect the handle to draft and fix by two screws around the driver's legs.