12.61. The uniform lock - general information and vacuum hoses

Conducting of the uniform lock
1 – the hose is pressure head/vacuum
2 – adjusting element of a forward back door
3 – adjusting element of a cover of a tank
4 – plug		 5 – adjusting element of a door of a back
6 – pump of the uniform lock
7 – plug
8 – socket

The uniform lock has the vacuum drive. After long inaction of the car and after replacement of the pump it is put in action only as a result of repeated inclusion.

If the system is serviceable, then blocking of all locks comes into effect through 2 from later inclusion. If the pump works more than 5 with, in system there is a leakage.

With leakage the pump should not work more than 50 with then the control unit in the pump of the uniform lock switches off the pump.

Repair of a vacuum hose

PERFORMANCE ORDER
1. Cut out a knife the damaged site.
2. Cut off a spare hose, for example, of Audi 533 862 225 of necessary length and put on both ends of the vacuum line.

Undocking of shtekerny connection of a rack And
PERFORMANCE ORDER
1. The socket-2-at a rack And well after removal of facing are resistant And. 1 – a casing, 3 – a vacuum hose to the pump of the uniform lock.
ATTENTION

For undocking of shtekerny connections of vacuum hoses of the uniform lock and adjusting elements it is necessary to unblock them previously.
2. Squeeze the socket-1-and disunite. 2 – adjusting element of the lock of a door.
3. I will corrode Rasstykuyte.

Laying of vacuum lines at doors
PERFORMANCE ORDER
1. Enter the socket-1-into a rack And yes join.
2. Record a vacuum hose –2– in a clip –3–. 4 – beam.
3. Record a vacuum hose –1– in a clip –2–.
4. Fix the socket in an adjusting element of a door.