12.9. Removal and installation of the lower central console
Elements of fastening of the central console
1 – back ashtray 2 – a cover in front of the parking brake 3 – screw, 4 N • m 4 – cover 5 – screw | the screw is forward, 1.5 N • m the screw is back, 4 N • m 6 – diagnostic plug |
REMOVAL
PERFORMANCE ORDER |
1. Open a cover of an ashtray –1– and take out an ashtray up. | 2. Turn out screws-3-. | 3. Uncover in front of the parking brake. | 4. Hook the screw-driver and uncover –4–. | 5. Turn out 4 screws-5-. | 6. Remove an armrest if it is available, address the subsection Removal and installation of an armrest. | 7. Move the lever of switching of speeds or the selector to back situation. |
8. Remove the diagnostic plug of a safety cushion, address the subsection Removal and installation of the diagnostic plug of security systems. | 9. Completely tighten the parking brake. | 10. Press a casing of the lever of switching or the selector below forward and turn out outside. Cut bokorezam a collar and remove a casing with the handle up. |
11. Raise the central console behind and remove it up. |
|
INSTALLATION
PERFORMANCE ORDER |
1. Move the lever of switching of speeds or the selector to back situation. | 2. Install the central console from above. | 3. Put on a casing of the lever of switching of speeds or the selector a bar and fix by a new collar. | 4. If necessary establish an armrest, address the subsection Removal and installation of an armrest. | 5. Fix the diagnostic plug. | 6. Release the parking brake. | 7. Screw 4 screws-5-. Forward tighten the moment 1.5 N • m, back the moment of 4 N • m. | 8. Insert 4 covers –4–. | 9. Insert a cover in front of the parking brake-2-. | 10. Screw screws-3-and tighten the moment 4 N • m. | 11. Insert an ashtray. | |