1.23. Traveling computer
Governing bodiesThe switch of functions (A) and key of dumping ("Reset") (V) are mounted in the handle of management of a screen wiper.
At the included ignition and repeated pressing the top / lower party of the switch of functions (A) they are consistently brought to indication.
Besides, prevention degree 2 alarm systems of speeding is established by the switch of functions.
1) On cars with an information system of the driver (FIS).
Pressing of a key of dumping (Reset) (at least 1 second) "time of the movement, average fuel consumption and average speed" can nullify the values kept in memory. Besides, it is possible to interrupt with short-term pressing of a key the alarm computer indication warning about excess of norm of time of continuous stay driving.
If necessary pressing of a key of dumping it is possible to switch off and turn on the digital display of the control panel.
At inclusion of ignition the last is brought to indication at the time of switching off of ignition function.
At a detachment of plugs of the accumulator all saved-up values are erased.
Display
The traveling computer issues the following information:
· current fuel consumption
· a course stock on fuel
· time of continuous stay driving
· average fuel consumption
· average speed of the movement
l/100 km current fuel consumption
Values of the current fuel consumption measured in l / 100 by km are brought to indication.
The expense is calculated on each 30-meter site of a way. During a stop of the car indication of the last of the calculated values remains.
If after start of the engine function of determination of the current fuel consumption is caused, then on the first 30–40 meters of a way average value is brought to indication it.
By means of this indication it is possible to choose the mode of the movement corresponding to optimum fuel consumption.
km a course stock on fuel
The course stock is determined by fuel by the discrete values counted by steps on 10 km. This indication shows how many kilometers the car can pass on the actual rest of fuel in this mode of the movement.
Calculations of a stock of the course fuel consumption on the last 30 km of a way is assumed as a basis. At more economic subsequent movement the stock of the course increases.
h time in way
Time in way with counting from the moment of the last dumping of data of memory is brought to indication. At the switched-off ignition value of time in way remains. At continuation of the movement the subsequent counting of time is added to it.
The limit of indications of time in way makes 23 hours and 59 minutes.
At desire to reckon time in way from a certain moment clear memory pressing of the Reset key.
Reminder on need of a break for the movement
In two hours after a start of motion, irrespective of the programmed function there is an automatic switching to indication of time in way. The blinking indication of a look "2:00" reminds the driver of need to take a break in the movement.
Short-term pressing the top or lower party of the switch of functions, or the Reset key this indication can be switched off. If ignition remains included or if the break makes less than 10 minutes, then in each next two hours the reminder on need to stop for rest will repeat with indication of time in a way of a look 4:00, 6:00, etc.
Lasting break more than 10 minutes to the switched-off ignition there is a dumping of data of counting of time into ways.
l/100 km Average fuel consumption
Average fuel consumption is brought to indication from the moment of the last dumping of data of memory of the memory device. Do not confuse it to the current fuel consumption.
At the switched-off ignition value of average fuel consumption remains in memory. At continuation of the movement data of the subsequent expense are considered.
For dumping of data of memory press the Reset key. At journey of the first 30 m after dumping zero value is brought to indication.
km/h – the average speed of the movement
Average speed of the movement is brought to indication from the moment of the last dumping of data of memory. At the switched-off ignition this size remains in memory. At continuation of the movement data of the subsequent run are considered.
For dumping of data of memory press the Reset key.
Indicators of fuel consumption, course stock on fuel and speed are displayed in metric, and in certain export options in the English system of units (l / 100 by km – mpg, km – mi, km/h – mph).
On an illustration as an example indication of the current fuel consumption is shown.