1.15. Seats


 Front seats

The correct provision of a seat is important for:

– bystry and reliable use of governing bodies
– not intense, not tiring bearing
– achievements of the maximum protective effect of belts and system of safety cushions.
ATTENTION

Therefore do not shift front seats too close to a steering wheel / dashboard.
During the movement of a leg have to be in space for legs – at all not on the dashboard or pillows of seats.


Establish your seat according to the following description. Consider the option of basic adjustment of provision of seats of the driver and forward passenger which is also given below.

Driver's seat

We recommend you the following option of adjustment of provision of a seat of the driver:

– Adjust the longitudinal provision of a seat of the driver so that slightly bent legs it was possible to squeeze out pedals completely.
– Adjust a back tilt angle so that the back the surface completely adjoined to a back and an opportunity to get the most top point of a steering wheel slightly bent hands was provided.
ATTENTION

In space for legs finding of any objects since in case of emergency brake application they I can get under pedals is not allowed.
In this case you will not be able to brake, squeeze out coupling or to press an accelerator pedal!


Seat of the forward passenger

The following adjustment of provision of a seat of the forward passenger is recommended:

– Direct (vertical) provision of a back.
– A convenient arrangement of legs in space for legs.
– At the same time displace a seat as it is possible further back.


1 unlocking of a back

(only two-door models)

Pull the handle up, unlock a back and put it forward. When folding a back the seat pillow rises and moves a little forward.

For return of a back to a starting position pull the handle up again.

For a possibility of unlocking and folding of a seatback of the forward passenger by the driver, on the left side of a passenger seat there is an additional handle of unlocking.
ATTENTION

For safety reasons backs of front seats during the movement have to be always locked!


2 regulation of an inclination of a back

Unload a seatback and adjust its inclination rotation of the handle.
ATTENTION

In order to avoid violation of protective action of seat belts you do not take away too far back a seatback during the movement.


3 regulation of height of a seat *

Height of a seat is regulated by pressing or procrastination of the handle.
ATTENTION

For safety reasons it is not necessary to regulate the provision of a seat of the driver on height during the movement!
Be careful at adjustment of height! The carelessness or loss of control over process of adjustment can become the reason of injuries.


4 exit of a lumbar support (эргоматик) *

Pressing of the switch forward or it is possible to put forward or remove respectively back, changing camber of a contour of a back, an upholstery in a lumbar zone.

Thanks to it extraordinary effective opiraniye of lumbar department of a backbone of all its natural contour, with the landing which is not tiring even at long trips is provided.

5 longitudinal adjustment of a seat

Delay the handle up and displace a seat. Then release the handle and move a seat to a clamp zashchelkivaniye.
ATTENTION

For safety reasons do not regulate the longitudinal provision of a seat of the driver during the movement!


Sports seat of "Recaro" *

1 longitudinal adjustment of a seat

Delay the handle up and displace a seat. Then release the handle and move a seat to a clamp zashchelkivaniye.
ATTENTION

For safety reasons do not regulate the longitudinal provision of a seat of the driver during the movement!


2 regulation of height of a seat

Height of a seat is regulated electrically by procrastination / pressing of the switch in the corresponding direction, up or down.
ATTENTION

For safety reasons it is not necessary to regulate the provision of a seat of the driver on height during the movement!
Be careful at adjustment of height! The carelessness or loss of control over process of adjustment can become the reason of injuries. The electric drive works also at the switched-off ignition / after extraction of a key from the ignition lock. Therefore never leave in the car of children unguarded.


3 exit of a lumbar support

Pressing of the switch forward or it is possible to put forward or remove respectively back, changing camber of a contour of a back, an upholstery in a lumbar zone.

Thanks to it extraordinary effective opiraniye of lumbar department of a backbone of all its natural contour, with the landing which is not tiring even at long trips is provided.

4 regulation of provision of a seatback

The back can be displaced by pressing of the switch in the directions specified by shooters:

Forward raising of a back
Back lowering of a back
ATTENTION

In order to avoid violation of protective action of seat belts you take away backs of front seats during the movement only back provided that the diagonal tape of a belt will adjoin to a breast.


5 unlocking of a back

(only two-door models)

Pull the handle up, unlock a back and take away it forward. At procrastination of the handle there is an unlocking and shift of all seat forward up. When folding a back the seat comes back to a starting position.

Regulation of a pillow of a seat


Thanks to a possibility of this individual adjustment the optimum opiraniye of hips on a seat pillow is provided.
For a vydviganiye press the handle of fixing located under a forward part of a pillow up and, having pulled for the handle, displace a pillow forward and establish it in the necessary situation.

For a zadviganiye – press the handle of fixing up and displace a pillow in the necessary situation.

Regulation of provision of an armrest *

For regulation of situation press the button in an end face of an armrest (shooter) and take away it down. After that it is lifted to a zashchelkivaniye on a clamp in the necessary situation.

Remember that at the armrest lowered against the stop mobility of a forearm is limited. Therefore at the movement on the city do not lower an armrest.

Head restraints


Head restraints are regulated on height and an inclination. They have to be established on growth. Correctly established head restraints in combination with seat belts provide effective protection.

Regulation of height

Undertake a head restraint both hands and displace it up or down.

The optimum protective effect is provided when finding the upper edge of a head restraint at least on a loss or higher than the level of eyes.

Removal and installation of head restraints

Standard seat

For removal pull a head restraint against the stop up, press the button (shooter) on the left bar and at the same time take a head restraint.

For installation insert and move head restraint bars into the directing openings until their heard fixing.

Sports seat of "Recaro" *

For removal of a head restraint wring out down at the same time both safety rings (address an illustration) and take a head restraint.

For installation insert and move head restraint bars into the directing openings until their heard fixing.

Back seat

Increase in the sizes of a luggage compartment



For increase in the sizes of a luggage carrier it is possible to put as both backs together forward, and separately everyone.

Folding of a back seat

PERFORMANCE ORDER
1. Remove back head restraints.
2. By means of a loop (1) on the face party of a seat raise and pull a seat pillow forward.
3. Take a pillow from its back party (2) and put up so that the pillow accepted vertical position before a back of a front seat.
4. Wring out the handle of unlocking (A) in the direction specified by an arrow.
5. Put a back forward.
6. Put a back forward that the put back and a bottom of a luggage carrier were at one level - address an illustration.
Return of a back seat to a starting position
At return of a back to a starting position you watch that seat belts of side seats were in a lentonapravlyayushchy trench. Otherwise jamming and damage of belts is possible.
7. Establish a back of a back seat in a starting position.
8. Return a pillow of a seat to a starting position and displace it completely back. Then wring out a forward part of a pillow of a seat until its fixing down. At the same time hold above a zone belt, otherwise it will get between a back and a seat that will result in impossibility of use of it.
ATTENTION

The back of a back seat has to be reliably recorded that at sudden braking luggage carrier freight was not displaced forward.