2.25. Replacement of the fuel filter of the diesel engine
Fuel filter
1 collar
2 fuel hose from a gasoline tank
3 sealing ring
4 adjusting valve with fuel hoses |
5 clip
6 fuel hose to the fuel pump of high pressure
7 fuel filter |
It will be necessary for carrying out work for you:
– Fuel filter of the diesel engine.
– Sealing rings of the adjusting valve.
The corresponding capacity is necessary for collecting inclusions of water.
ATTENTION
The following diesel fuel has to be immediately removed with rags, especially from rubber details (hoses of cooling liquid) which, otherwise, will be damaged.
Do not throw out the fulfilled oil at all and do not pour out it together with household waste. Local authorities have to inform on the location of collection points for the fulfilled oil.
Removal
|
PERFORMANCE ORDER
|
| 1. Clear from outer side fuel hoses-2-and-6-. Cut bokorezam collars and remove hoses from the filter. |
| 2. Remove sideways a clip –5–. |
| 3. Remove the adjusting valve-4-with the fuel hoses attached to it up. |
| 4. Weaken the screw of fastening of a collar –1– on the holder and take out the filter –7– of the holder. |
| 5. Fill the new filter with pure diesel fuel. Thus, the engine will quicker be started. |
| 6. Insert the filter in the holder and tighten a collar the screw-1-. |
| 7. Replace a sealing ring –3–, having moistened it with slightly diesel fuel before installation. |
| 8. Insert the adjusting valve and fix by a clip –5–. |
| 9. Put on fuel hoses-2-and-6-and fix them by collars. |
ATTENTION
At the same time do not mix an entrance and an exit. The arrow on the fuel filter shows in the direction of a fuel input in the filter.
|
| 10. Start the engine. Air quits the fuel system independently after start of the engine. After repeated pressing the accelerator pedal fuel has to pass through a transparent hose to the fuel pump of high pressure without vials of air. |
| 11. Visually check fuel system for tightness, in particular, in places of connection of the fuel filter. |
|