4.2.9. Removal and installation of the compressor
ATTENTION Do not open a contour of cooling of the conditioner. If coolant gets on skin, it can lead to a frostbite.
The compressor of the conditioner can be removed from the holder without opening of a contour of cooling. It can be necessary in connection with carrying out repair of other devices. At the same time the compressor acts and suspended in a motive compartment with the attached hoses.
4-cylinder petrol engine
REMOVAL
| PERFORMANCE ORDER |
| 1. Take off maple a belt, address the subsection Removal and installation of a ridge maple belt. | | 2. Remove facing between a motive compartment and the right wheel casing, address an illustration (shooters specified fastening bolts). | | 3. Turn off bolts of fastening and remove the power steering pump. Suspend it with the attached hoses to the chassis, address the subsection Removal and installation of the pump of the power steering. | | 4. Turn off bolts of fastening (And). | 5. Remove the compressor from the holder and suspend on a wire to a body.
ATTENTION Do not suspend the compressor for the attached hoses.
| | INSTALLATION
| | 6. Completely insert the plug (V) before installation of the compressor into a compressor opening. |
| 7. Tighten bolts of fastening (A) the moment of 45 N • m. | | 8. Put on maple a belt, address the subsection Removal and installation of a ridge maple belt. | | Diesel engine | | REMOVAL
| | 9. Take off maple a belt, address the subsection Removal and installation of a maple belt. | | 10. Remove facing between a motive compartment and the right wheel casing, address an illustration (shooters specified fastening bolts). | |
| 11. Turn off bolts of fastening (And). |
| Remove the compressor from the holder and suspend on a wire to a body. |
ATTENTION
Do not suspend the compressor for the attached hoses.
| |
INSTALLATION