| 1. Remove the heater drive. |
| 2. Disconnect a support of drafts (And). |
| 3. Disconnect drafts (V) at the heater drive. |
| 4. Remove a nozzle of the region of legs, address the subsection Removal and installation of a nozzle of the region of legs. |
| 5. Hook the screw-driver and remove brackets (A) of a support of the drive of a heater on a heater casing. |
| 6. Carefully remove drafts from levers (V) and (C). |
| INSTALLATION
|
| 7. Before installation check drafts of a heater for ease of the course. In the presence of jammings or damages of draft replace. |
ATTENTION At assembly of draft of a heater fix by collars and clips so that they did not concern mobile parts.
|
| Connection of cables with the heater control panel |
| 8. Connect cables (V) so that the winding was turned down. |
| 9. Connect a green cable (A) of the gate of a nozzle of defrosting of glasses/region of legs to the heater drive lever. Record a support. |
| 10. Connect a yellow cable (V) of the gate of a nozzle of defrosting of glasses to the heater drive lever. Record a support. |
| 11. Connect a brown cable (C) gates of a nozzle of defrosting of glasses with the heater drive lever. Record a support. |
| 12. Install the heater drive. |
| Connection of cables with the heater case |
| 13. Connect a green cable (A) to the lever of the gate of a nozzle of defrosting of glasses/region of legs. Do not fix a support yet. |
| 14. Connect a yellow cable (V) to the lever of the central gate. |
| 15. Connect a brown cable (C) with the lever of the temperature gate. |
| Adjustment of drafts of a heater |
| 16. Turn the handle of the choice of temperature against the stop in situation "kalt" ("cold"). |
| 17. Slightly press the lever (V) on a heater box in the direction of an arrow. Enshrine draft on a support in this provision by a bracket (And). |
| 18. Turn the air distributor handle against the stop in the provision of distribution of air to a windshield. |
| 19. Slightly press the lever (C) the central gate in the direction of an arrow, address an illustration in point 17. Enshrine draft on a support in this provision by a bracket (And). |
| 20. Press the lever (V) of the gate of defrosting of glasses/region of legs in the direction of an arrow and fix draft on a support by a bracket (And). |
| 21. Turn in different directions both handles between an extreme emphasis, they have to concern both emphasis. |
| 22. Remove a nozzle of the region of legs, address the subsection Removal and installation of a nozzle of the region of legs. |