11.3.1. Removal and installation of the block of a safety cushion
ATTENTION
Before removal of the block a safety cushion surely take the appropriate measures of safety.
|
PERFORMANCE ORDER
|
1. Disconnect a negative cable (–) of the rechargeable battery at the switched-off ignition.
ATTENTION
Thereof information from electronic blocks of memory, such as, a radio receiver code is erased. Without code the radio receiver can be switched on only by the manufacturer or HUNDRED AUDIS. Therefore study instructions in the subsection Removal and installation of the rechargeable battery and the subsection Input of a Code of the Radio Receiver.
|
| 2. Isolate a negative pole (–) of the rechargeable battery thereby to exclude casual contact. |
| 3. Establish wheels directly, and a steering wheel in average situation. |
|
4. Turn out two Torx screws of fastening of the block of a safety cushion T30 key. |
| 5. Rasstykuyte safety cushion block socket. |
| 6. Remove the block and put the soft party aside up. |
| 7. Do not change the provision of a steering column (the direct provision of wheels). |
|
INSTALLATION
|
PERFORMANCE ORDER
|
| 1. Join the safety cushion socket. |
| 2. Establish a safety cushion on a steering wheel and fix by the moment 7 N • m. |
3. Include ignition, the ignition key has to be in situation "Movement".
ATTENTION
During connection of the rechargeable battery do not leave people in interior of the car.
|
4. Attach a cable of mass of the rechargeable battery.
ATTENTION
Make active automatic equipment of the power window, and also establish hours, being guided by the subsections Removal and installation of the rechargeable battery and Input of a code of the radio receiver.
|
|