5.1.5. Connection of remote control of the fuel pump for conducting checks

Connection of remote control of the fuel pump for conducting checks and necessary accessories

1 - press contact switch
2 - a clip "crocodile" (the size corresponding to a pole of the rechargeable battery)
3 - the safety lock which is built in a wire: the case and a safety lock on 8 A
4 - the flat plug which can be installed instead of a safety lock of the fuel pump
5 - single-conductor cable with a section of 1.5 mm2 and 5 m long

Petrol engines

Remote control is necessary when the electric fuel pump has to give fuel at the switched-off engine.

PERFORMANCE ORDER
1. Take out a safety lock No. 28 of the fuel pump in the block of safety locks (the fifth safety lock from above, at the same time address an illustration).
2. Insert remote control with the flat plug into contacts of a safety lock in the block of safety locks.
3. Attach remote control by means of contact "crocodile" to a positive pole (+) the rechargeable battery.
4. If the switch of the remote switch turns on press, the fuel pump has to pump fuel that has to be heard.