5.1.3. Adjustment of the drive of gas
Gas drive. L engines 1.6, 1.8, except APY
1 drive of gas 2 stopper 3 accelerator pedal 4 remote plug |
5 plug of a support 6 washer 7 persistent screw 8 nut, 20 N of m |
The petrol engine, except the APY engine
ATTENTION
Cars with the diesel engine and the AUDI S3 model (APY engine) have no gas drive. The provision of a pedal of a brake is transferred to a control system of the sensor located on a pedal.
The drive of gas is very sensitive to a break. Therefore at installation it is necessary to observe extra care. Insignificant demolition can lead to a drive exit out of operation in the course of the movement of the car. The drives having damages should not be installed.
PERFORMANCE ORDER
|
1. Press completely the accelerator pedal and clamp it in this situation or ask to make it the assistant. |
2. Check whether the lever of a butterfly valve adjoins to an emphasis of full gas. If necessary adjust the gas drive. |
|
ADJUSTMENT
PERFORMANCE ORDER
|
|
1. Take out a clamp (the shooter on an illustration). |
2. Take out the drive at a support so that the lever of a butterfly valve adjoined to an emphasis of full gas. In this situation insert a clamp. |
3. In addition for the car with AT: Release the accelerator pedal and again slowly move to the direction of full gas. At some distance against the stop of full gas the kik-Down switch has to work distinctly. |
|