| 1. Remove the top cover of a gear belt. |
| 2. Mark a felt-tip pen the direction of its rotation. The engine if to look sideways, rotates clockwise. |
| 3. Turn a bent shaft so that the camshaft reached position of VMT of the piston of the first cylinder. |
|
4. It is possible to turn the engine in several ways.
1. Lift and install the car on supports ahead sideways. Include the fifth transfer, tighten the parking brake. Turn the lifted wheel manually. Thus, the bent shaft is at the same time turned. Performance of this operation requires the assistant.
2. Install the car on the flat platform. Include the fifth transfer. Shift the car forward or back.
3. Switch RKPP to neutral situation. Tighten the parking brake. Turn a bent shaft for the central bolt of a pulley of the belt drive. |
ATTENTION
Do not turn the engine for a bolt of fastening of a wheel of the camshaft. In the way excessive load of a gear belt is created.
|
| 5. Turn the engine so that marking on a wheel of the camshaft coincided with marking of VMT on a cover of a head of cylinders. At the same time marking of a pulley of a bent shaft costs on the shooter of the lower cover of a gear belt. Now the engine is in the provision of the moment of ignition of the first cylinder. |
| |